Vertical air handing unit--element series

Vertical air handing unit--element series

Dry design, no water

The water tray has a drainage gradient, and the condensate flows to the drain

Stainless steel, insulated at the bottom

Download PDF

Product Details

A 1
Z 2
A 3
T 4
100 5、6、7
L 8
6 9
D 10

1. Hanmer air conditioning box
2. Unit type Combination type: Z-combination type
3. Product serial number
4. Box plate thickness T-25mm F-50mm
5~7. Nominal air volume (x 100m3/h)
8. Take-up direction L-left connection R-right connection
9. Coil row number 4-4 row 6-6 row 8-8 row
10.D-DX coil (direct expansion coil)


Polyurethane panel

Double sandwich sandwich structure. Special aluminum profiles around the panel for excellent thermal insulation

The inner panel is strengthened by bending to make the panel extremely strong

The foaming material with a certain flame retardancy has a foaming density of 48 kg/m3, which can effectively prevent the cooling amount from being transmitted.

The standard configuration is the outer color steel plate, the inner galvanized steel plate, and the edge cutting edge of the galvanized steel plate is not in contact with the air flow. The rust is prevented from being cut. The stainless steel plate or the like can also be used according to requirements.

Thickness is 50mm

Operating temperature range of 40 to 90 ° C

Rock wool panel

Double sandwich sandwich structure, inner and outer panels are bent and sprayed, and the panel looks beautiful

Durable: Inorganic FRP material has special properties, the surface is strong and strong, and the bearing capacity is up to 350 kg.

It has excellent resistance to wind and impact; it has the advantages of high temperature resistance, acid and alkali resistance, corrosion resistance and anti-aging; it solves the technical problems of returning halogen and frosting, and its service life can reach more than 30 years.

It should have a high sound absorption coefficient.

Has excellent fire performance.



Select Plug fan direct drive without volute fan

Wind wheel material: cold-rolled steel plate coating, anti-corrosion

Connection method: the fan and motor are fixed on the same bracket, and rubber or spring shock absorption

Drive: direct drive. The fan impeller is mounted directly on the motor shaft

Motor: Fully enclosed air cooled cooling variable frequency motor

Advantages: avoid belt wear and bring extra dust


Filter material meets VDI 6022 technical requirements

Closed-hole sealing material, no moisture absorption

Filter for quick and easy removal and installation

Filter section can be equipped with differential pressure gauge or differential pressure switch for filter resistance detection

Optional heating device or preheating device to heat the filter section to meet the requirements of high humidity


The skeleton and the panel are double-sealed, and the sealing material is made of rubber material and polyurethane foam material, which has good elasticity and anti-aging properties.

The sealing rubber is hollow design. It has positive and negative pressure follow-up, and it has self-pressing function regardless of positive pressure or negative pressure.

The panel is fixed to the frame by bolts with special aluminum alloy pressure plates, which is firm and reliable.

The air leakage rate of the unit cabinet is less than 1% under 1000Pa standard working conditions.


  • captcha